Christmas, Crafts, Winter

Card Making with Sleigh Ride Holiday Craft Stencils

Season’s greetings! It’s the time of year to stencil your greeting cards and holiday party invitations before your hands get too cold. Card making is easy with our Sleigh Ride Holiday Craft Stencils. Make a unique copy for everyone on the guest list for your next party. For this project you will need:

Sleigh Rides Craft Stencil – https://bit.ly/2DDPWJs
Repositionable Spray Adhesive – https://bit.ly/2yFQoBK
Stencil Brushes – https://bit.ly/2z8MYsm
Frog Tape Painter’s Tape – https://bit.ly/2OtyDkb
Americana Acrylic Paints:
Burnt Umber – https://bit.ly/2F9zNNt
Mississippi Mud – https://bit.ly/2OJpZJg
Forest Green – https://bit.ly/2zcS1YK

This slideshow requires JavaScript.

The first step in card making with craft stencils is to spray the back of your stencil with Spray Repositionable Adhesive. Hold the can 8″-12″ away to spray a light coat of spray repositionable adhesive on the back of your stencil. Give the spray about 30-60 seconds to dry and become tacky. The adhesive on the back of your stencil should be sticky to the touch but not wet. If you spray too much adhesive on the back your stencil may rip or tear the paper. Try pressing the stencil to a flat surface like a table top or piece of paper then peeling it off to help make your stencil a little less tacky. Once you have prepared your stencil with repositionable spray adhesive you’re ready to place your stencil onto your card. We’ll be stenciling a portrait card but this technique works for landscape cards as well. If there are any stencil details near the edges of the stencil you will want to border your stencil with Frog Tape Painter’s Tape to keep paint off the edges of your card.

This slideshow requires JavaScript.

With your stencil details pressed to the card you are ready to start adding color. We will be using 3 different colors which means you will need 3 different stencil brushes (or two double sided stencil brushes). The plan is to use Burnt Umber for the letters, Mississippi Mud for the antlers & arrows, and Forest Green for the pine tree. To do multiple repeats of a multi color design you will need to distribute each of your 3 colors of acrylic paint onto a paper plate. Stencil one color at a time starting with the green since there are less green elements in this design. Swirl your stencil brush into your green acrylic paint, then swirl the excess paint onto a paper towel until your brush feels dry to the touch. Using the dry brush technique your paint won’t bleed beneath the edges of your stencil. Without swirling paint into the antlers, swirl your green acrylic paint through the pine tree until you get full coverage. Once you stencil all the green elements of your design set your stencil brush aside for later.

This slideshow requires JavaScript.

The next color you should stencil are the letters Burnt Umber since the letters aren’t too close to the green pine tree and dots. There shouldn’t really be any wet paint on your stencil or paper but by waiting to stencil near the green you reduce the risk of paint mixing into your other colors. Swirl your brush into your Dark Chocolate acrylic paint then swirl the excess paint onto a paper towel. With your brush dry begin swirling the color into the letters of your stencil. You may need to do 1-2 swirling passes over the letters. If you find it difficult to stencil the letters without going into surrounding design elements use Frog Tape to mask them off. Once you finish stenciling the letters, set your stencil brush aside to stencil the next design element.

This slideshow requires JavaScript.

We saved the antlers and arrows for last since they are close to other parts of the design. You may find it helpful to mask off the letters with Frog Tape Painter’s Tape to prevent your brush from going into other elements of the design. With the letters masked off you can start swirling Mississippi Mud acrylic paint into your last fresh stencil brush. Once your brush is coated in paint, dry the bristles by swirling them off onto paper towel, then swirl the paint through the antlers and arrows in the design. After 1-2 passes with the swirling technique you should have full coverage. It is important to note that if you have too much paint on your brush you will end up getting too much build on the edges of the stencil. Gently peel your stencil off the surface of your card. Now you know how to replicate the card design with three different paint colors.

This slideshow requires JavaScript.

Take your stencil and press it to the surface of your next card. Repeat the steps for the first card by swirling each color through your stencil one at a time. You may not need to load your brush with paint between cards because less is more when it comes to stenciling. Use Frog Tape Painter’s Tape to isolate design elements when you find yourself stenciling in any tight places. Another option is to stencil your cards in a single color but we prefer the flare of multiple colors working together. Once all of your cards are stenciled they should already feel dry to the touch. Write in your season’s greetings and send out your homemade cards to friends and family. They won’t believe you took the time to paint your holiday cards, but the joke is on them since you had help from My Crafty Stencils.

To browse our product visit us at https://www.mycraftystencils.com/ and for more information check out the video below!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s