Crafts, Home Decor, Summer

Welcome Home, Golden Pineapple

Welcome! To another My Crafty Stencils tutorial!

Today we will explain how to use our Welcome Home Craft Stencil onto piece of canvas paper to create a framed wall accent. For this craft we could not resist the glimmer of Glorious Gold Americana acrylic paint. In addition to this liquid gold you will also need:

This slideshow requires JavaScript.

Start off by spraying the back of your stencil with Repositionable Spray Adhesive. The spray should be used 8″-12″ away from your stencil to very lightly coat the back. Put the stencil down, spray side up, for 30-60 seconds to allow it to dry and become tacky. If you use your sprayed stencil too soon the adhesive will bond to your project.

This slideshow requires JavaScript.

After you let the spray rest for a minute the back should be lightly tacky. The tacky adhesive will keep the stencil details flush to your project while stenciling but will easily peel off to reveal the design beneath. Put your stencil on your project and adjust it to find the center with a ruler before pressing it to the surface. Make sure that all the little details are pressed into place.

This slideshow requires JavaScript.

Once your stencil is in place, use Frog Tape to keep your stencil brush from wandering off the edges of the stencil onto your project. You want to be sure that you are only painting through the holes of the stencil design.

This slideshow requires JavaScript.

Take your bottle of Glorious Gold acrylic paint and distribute a small amount onto your paper plate palette. When stenciling a little paint goes a long way. Swirl your stencil brush in the paint until the bristles soak up the paint. In stenciling this is known as loading your brush. Once loaded with paint you will want to unload it by swirling the excess off onto a paper towel. This may seem counterproductive but it is this dry brush technique that you should use to successfully stencil.

This slideshow requires JavaScript.

This next step is known as the dab test. This is how you know you have the right amount of pain on your stencil brush. To do the dab, take your unloaded stencil brush and dab it on a piece of paper or paper plate. Next, drag your finger over the dab. If the dab drags and smudges you should unload more paint off of your brush and try again. Once your finger can pass over the dab without smudging your bush should be dry enough to stencil. It takes a few light coats of paint to stencil properly, but it is worth it to not have paint bleed underneath the stencil onto your project.

This slideshow requires JavaScript.

After these necessary preparations you should be ready to stencil. Using the dry brush technique, swirl your color through the holes in the design. By stenciling lightly you will create crisp edges in your design. These light coats will help you to shade your stencil in order to create the illusion of depth. Try stenciling the stencil lighter in the center than the edges for a classic stenciled look.

This slideshow requires JavaScript.

After about 3-4 coats of light stenciling you should reach full coverage. Try not to rush it! There is nothing worse than globbing excessive paint onto your stencil. Nothing good will come of this. Earlier in this post I mentioned paint bleeding into the design. Paint bleed is the enemy of stenciling. This is what happens should your brush ever feel wet to the touch with paint. Even with repositionable spray if you use too much paint it will inevitably turn the crisp lines of the design into a blurry mess. The dry brush technique and stenciling go hand in hand!

Pineapple 1

Come check out https://www.mycraftystencils.com/ for more stencil designs & tools

To view this video tutorial & more, subscribe & visit the My Crafty Stencils on Youtube

For regular updates on our upcoming designs like & follow My Crafty Stencils on Facebook

Advertisements